Control - Halogen Free

Home » Products » Control » Control – Halogen Free

Control – Halogen Free

XLPE/SHF1 – 500 e 1000V – 90ºC
NBR 16442
IEC 60502-1

Types of Armor

Machcontrol CA

Full shielding tape
aluminum and drain

Machcontrol CM E

Copper tape shielding

Machcontrol CM D

Steel tape frame

Machcontrol CM

Polyester tape separator

Machcontrol CM B

Copper braid shielding

Machcontrol CM C

Steel braid frame

Technical Characteristics

UV Resistant

Free of Heavy Metals

Flame Retardant

Oil Resistant

Bending Radius

Unarmoured cables: 6 x Outer diameter
Armored cables: 12 x Outer diameter

Maximum Traction

40N/mm² applied on copper conductors.

Standard Construction

Conductor	Bare copper wires, soft temper. Stringing: Class 5, according to NBR NM 280. Flexible.
Isolation	XLPE – Cross-linked polyethylene, black numbered sequentially.
Cover	SHF1 - halogen-free thermoplastic compound, in black, with rip cord, cylindrical finish.

Optional Features

Upon request, instrumentation cables can be manufactured with the following construction options:

Conductor	Tinned copper; Class 5 copper.
Identification	Colored veins; Green/yellow vein (protective conductor)
Isolation	HEPR (90ºC) Polyethylene PE (70°C).
Shielding	Copper braid + copper tape (E+B);
Frame	Helical Steel Wire (SWA).
Cover	PE (Polyethylene ST3); SHF2 – halogen-free thermosetting compound.
Color	Other colors on request

Applicable Standards

NBR NM 280	Insulated cable conductors (IEC 60228 MOD).
NBR 6251	Power cables with extruded insulation for voltages from 1kV to 30kV.
NBR 10300	Non-halogenated control cables with low smoke emission for voltages up to 1kV.
IEC 60502-1	Power cables with extruded insulation for voltages from 1kV to 30kV.

Routine Tests

Voltage Test	1.5 kV / 5 minutes: 500V (sections 0.5 to 1.0 mm2) 3.5 kV / 5 minutes: 1000V (sections 1.5 to 10 mm2)
Resistence test of isolation	300 to 500V / 1 to 5 minutes

Conductor Resistance

Section (mm2)	Max. DCR @20ºC (ohm/km)
0,5	39
0,75	26
1,0	19,5
1,5	13,3
2,5	7,98
4,0	4,95
6,0	3,30
10	1,91

Maximum traction: 40 N/mm² applied on copper conductors.